Tel: +86-574-88402758
Fax: +86-574-89007718



Injection molding machine


product description:


This Servo drive machine is designed For your Universal Processing applications  this series of machinery is fast ,accurate and has Excellent Repeatability .This THREEPLAST injection molding machine can help you reach a maximum producibility on a wide range of materials . with a Nitrided +Alloy screw & barrel . wear-resistant screw tip. High strength tie-bars and rigid platens . it all adds up to a unit ,that will stay the course ,giving consistently high quality and output with a wide range of materials and with the most complex of molds . 


 High Speed Valve Response , reliable continual operation and optimum energy savings .

 Excellent Wear-Resistant , corrosion resistant screw & barrel for the processing of materials with fiber additives and also fire retardant materials .

 Screw Driven by high torque ,variable speed ,radial piston motor.

 PID Temperature Control insures an accuracy of +/-1℃,thus the fluctuation of the temperature is very minimal . Cushion Monitoring can help the operator to check the quality of the product. I.e. if the injection end position is under the allowed tolerance that means that the product is within necessary required quality . 

 Proportional Valve control for pressure and volume settings.

 Unique , Ultra Reliable . five point toggle clamping mechanism which is characterized by an almost ideal kinematic velocity feature .

 Mold opening and closing speed are digitally set in 4 stages , each with variable adjustment on pressure , volume and position . 

 Injection Speed profiles digitally set at 5 selectable stages by time or distance . holding pressure by 4 stages and charging by 6 stages . 

Product Details

Injection Unit A B C
Screw Diameter In 1.5 1.65 1.77
mm 38 42 45
Screw L/D ration L/D 22 18.6 17.5
Shot volume  in3 11.47 13.73 15.56
Cm3 188 225 255
Shot weight (PS) g 170 204 249
oz 6 7.2 8.78
Injection Pressure psi 31175 26970 23490
Mpa 215 186 162
Max screw speed rpm 200
Clamping Unit  
Clamping Force KN / T 1300 / 130
U.S.ton 143
Opening stroke In 14.17
mm 360
Tie-bars distance In 16.54 X 14.96
mm 420 X 380
Max.mold height In 16.93
mm 430
Min.mold height In 6.69
mm 170
Ejector Stroke In 4.72
mm 120
Ejector force KN 40
U.S. ton 4.4
Pump power Kw 15
HP 20.1
Heating capacity Kw 7.3
HP 9.92
Oil tank Capacity Litre 215
Machine Dimensions In 181.1 X 47.24 X 70.87
m 4.60 X 1.20 X 1.80
Machine weight Kg 3800
Lbs 8360