Tel: +86-574-88402758
Fax: +86-574-89007718



Injection molding machine


product description:


This Servo drive machine is designed For your Universal Processing applications  this series of machinery is fast ,accurate and has Excellent Repeatability .This THREEPLAST injection molding machine can help you reach a maximum producibility on a wide range of materials . with a Nitrided +Alloy screw & barrel . wear-resistant screw tip. High strength tie-bars and rigid platens . it all adds up to a unit ,that will stay the course ,giving consistently high quality and output with a wide range of materials and with the most complex of molds . 


 High Speed Valve Response , reliable continual operation and optimum energy savings .

 Excellent Wear-Resistant , corrosion resistant screw & barrel for the processing of materials with fiber additives and also fire retardant materials .

 Screw Driven by high torque ,variable speed ,radial piston motor.

 PID Temperature Control insures an accuracy of +/-1℃,thus the fluctuation of the temperature is very minimal . Cushion Monitoring can help the operator to check the quality of the product. I.e. if the injection end position is under the allowed tolerance that means that the product is within necessary required quality . 

 Proportional Valve control for pressure and volume settings.

 Unique , Ultra Reliable . five point toggle clamping mechanism which is characterized by an almost ideal kinematic velocity feature .

 Mold opening and closing speed are digitally set in 4 stages , each with variable adjustment on pressure , volume and position . 

 Injection Speed profiles digitally set at 5 selectable stages by time or distance . holding pressure by 4 stages and charging by 6 stages . 

Product Details

Injection Unit A B C
Screw Diameter In 6.69 7.28 7.87
mm 170 185 200
Screw L/D ration L/D 23.9 22 20.3
Shot volume  in3 1467.6 1738.07 2031.3
Cm3 24059 28493 33300
Shot weight (PS) g 21894 25928 30303
oz 772.2 914.5 1068.8
Injection Pressure psi 24650 20880 17835
Mpa 170 144 123
Max screw speed rpm 60
Clamping Unit  
Clamping Force KN / T 25000 / 2500
U.S.ton 2750
Opening stroke In 74.8
mm 1900
Tie-bars distance In 72.83 x 66.93
mm 1850 x 1700
Max.mold height In 74.8
mm 1900
Min.mold height In 31.5
mm 800
Ejector Stroke In 17.72
mm 450
Ejector force KN 480
U.S. ton 52.8
Pump power Kw 55x4
HP 73.7x4
Heating capacity Kw 170
HP 227.8
Oil tank Capacity Litre 3700
Machine Dimensions In 767.72 x 157.48 x 204.72
m 19.50 x 4.00 x 5.20
Machine weight Kg 175000
Lbs 385805




No more