| AUTOMATIC MOLD TEMPERATURE CONTROL PARAMETERS | ||||||||||
| Model | Temperature | Heat capacity | Pump Power | Max.pump volume |
Max.Pump Convery distance |
Pump Type | Cooling Method | Mold connecting | External size L x W x H mm |
Weight |
| TH-M6-W | Water 90 ℃ ( 120 ℃) |
6 KW | 0.37 KW | 40 L/min | 30 m | Horizontal | Direct cooling 120 ℃ Indirect cooling 95 ℃ |
3/8 " 2 x 2 | 580 x 350 x 780 | 62 kg |
| TH-M9-W | 9 KW | 0.75 KW | 135 L/min | 25 m | 3/8 " 4 x 2 | 680 x 350 x 780 | 90 kg | |||
| TH-M12-W | 12 KW | 0.75 KW | 135 L/min | 25 m | 3/8 " 4 x 2 | 680 x 350 x 780 | 110 kg | |||
| TH-M6-O | Oil 170 ℃ ( 200 ℃) |
6 KW | 0.37 KW | 40 L/min | 30 m | Indirect cooling | 3/8 " 2 x 2 | 580 x 350 x 780 | 75 kg | |
| TH-M9-O | 9 KW | 0.75 KW | 135 L/min | 25 m | 3/8 " 4 x 2 | 680 x 350 x 780 | 100 kg | |||
| TH-M12-O | 12 KW | 0.75 KW | 135 L/min | 25 m | 3/8 " 4 x 2 | 680 x 350 x 780 | 125 kg | |||
| HIGH TEMPERATURE MOLD AUTOMATIC TEMPERATURE CONTROL PARAMETERS | ||||||||||
| Model | Highest temperature Control ℃ |
Heat capacity | Pump Power | Max.pump volume |
Max.Pump Pressure |
Liquid storage Volume |
Cooling Method | Oil inlet and outlet Pipe |
External size L x W x H mm |
Weight |
| TH-M18-O | 250 ℃ | 9 + 9 kw | 1.5 kw | 105 L/min | 3 bar | 35 L | Indirect cooling | 1" x 1" | 1100 x 500 x 900 | 85 kg |
| TH-M24-O | 250 ℃ | 12 + 12 kw | 1.5 kw | 105 L/min | 3 bar | 35 L | 1" x 1" | 1100 x 500 x 900 | 90 kg | |
| TWO STAGE AUTOMATIC MOLD TEMPERATURE CONTROL PARAMETERS | ||||||||||
| Model | Temperature ℃ | Heat capacity | Pump Power | Max.pump volume |
Max.Pump Pressure |
Liquid storage Volume |
Cooling Method | Mold connecting | External size L x W x H mm |
Weight kg |
| TH-M6-W(2D) | 95 ℃ | 6 +6 kw | 0.37 x 2 kw | 40 L/min | 1.5 bar | 10 x 2 L | Indierct cooling | 3/8" x 4 | 1000 x 450 x 850 | 120 |
| TH-M6-O(2D) | 170 ℃ | 6 +6 kw | 0.37 x 2 kw | 40 L/min | 1.5 bar | 10 x 2 L | 3/8" x 4 | 1000 x 450 x 850 | 120 | |
| TH-M9-W(2D) | 95 ℃ | 9+9 kw | 0.75 x 2 kw | 100 L/min | 2 bar | 10 x 2 L | 3/8" x 8 | 950 x 700 x 750 | 140 | |
| TH-M9-O(2D) | 170 ℃ | 9 +9 kw | 0.75 x 2 kw | 100 L/min | 2 bar | 10 x 2 L | 3/8" x 8 | 950 x 700 x 750 | 140 | |
| TH-M12-W(2D) | 95 ℃ | 12 +12 kw | 0.75 x 2 kw | 110 L/min | 2.2 bar | 10 x 2 L | 3/8" x 8 | 950 x 700 x 750 | 140 | |
| TH-M12-O(2D) | 170 ℃ | 12 +12 kw | 0.75 x 2 kw | 110 L/min | 2.2 bar | 10 x 2 L | 3/8" x 8 | 950 x 700 x 750 | 140 | |
|
Unstable Temperature in the process of mold forming always tends to produce unqualified products, According to the principle of heat exchange . TH-M mold temperature control make use of water and high property heat transferring oil as a medium to keep a properstable temperature in the process of mold forming so as to guarantee high quality of products and raise the productive efficiency. |
||||||||||
