Tel: +86-574-88402758
Fax: +86-574-89007718



Injection molding machine


product description:


This Servo drive machine is designed For your Universal Processing applications  this series of machinery is fast ,accurate and has Excellent Repeatability .This THREEPLAST injection molding machine can help you reach a maximum producibility on a wide range of materials . with a Nitrided +Alloy screw & barrel . wear-resistant screw tip. High strength tie-bars and rigid platens . it all adds up to a unit ,that will stay the course ,giving consistently high quality and output with a wide range of materials and with the most complex of molds . 


 High Speed Valve Response , reliable continual operation and optimum energy savings .

 Excellent Wear-Resistant , corrosion resistant screw & barrel for the processing of materials with fiber additives and also fire retardant materials .

 Screw Driven by high torque ,variable speed ,radial piston motor.

 PID Temperature Control insures an accuracy of +/-1℃,thus the fluctuation of the temperature is very minimal . Cushion Monitoring can help the operator to check the quality of the product. I.e. if the injection end position is under the allowed tolerance that means that the product is within necessary required quality . 

 Proportional Valve control for pressure and volume settings.

 Unique , Ultra Reliable . five point toggle clamping mechanism which is characterized by an almost ideal kinematic velocity feature .

 Mold opening and closing speed are digitally set in 4 stages , each with variable adjustment on pressure , volume and position . 

 Injection Speed profiles digitally set at 5 selectable stages by time or distance . holding pressure by 4 stages and charging by 6 stages . 

Product Details

Injection Unit A B C
Screw Diameter In 1.65 1.77 1.97
mm 42 45 50
Screw L/D ration L/D 22 20 18.5
Shot volume  in3 19.03 21.84 26.96
Cm3 312 358 442
Shot weight (PS) g 284 326 402
oz 10.02 11.5 14.18
Injection Pressure psi 29435 25665 20735
Mpa 203 177 143
Max screw speed rpm 200
Clamping Unit  
Clamping Force KN / T 1700 / 170
U.S.ton 187
Opening stroke In 17.13
mm 435
Tie-bars distance In 18.30 X 18.30
mm 465 X 465
Max.mold height In 21.65
mm 550
Min.mold height In 7.87
mm 200
Ejector Stroke In 5.31
mm 135
Ejector force KN 46
U.S. ton 5.06
Pump power Kw 22
HP 29.48
Heating capacity Kw 9.9
HP 13.27
Oil tank Capacity Litre 300
Machine Dimensions In 200.79 X 55.12 X 86.61
m 5.10 X 1.40 X 2.20
Machine weight Kg 5300
Lbs 11660