Tel: +86-574-88402758
Fax: +86-574-89007718



Injection molding machine


product description:


This Servo drive machine is designed For your Universal Processing applications  this series of machinery is fast ,accurate and has Excellent Repeatability .This THREEPLAST injection molding machine can help you reach a maximum producibility on a wide range of materials . with a Nitrided +Alloy screw & barrel . wear-resistant screw tip. High strength tie-bars and rigid platens . it all adds up to a unit ,that will stay the course ,giving consistently high quality and output with a wide range of materials and with the most complex of molds . 


 High Speed Valve Response , reliable continual operation and optimum energy savings .

 Excellent Wear-Resistant , corrosion resistant screw & barrel for the processing of materials with fiber additives and also fire retardant materials .

 Screw Driven by high torque ,variable speed ,radial piston motor.

 PID Temperature Control insures an accuracy of +/-1℃,thus the fluctuation of the temperature is very minimal . Cushion Monitoring can help the operator to check the quality of the product. I.e. if the injection end position is under the allowed tolerance that means that the product is within necessary required quality . 

 Proportional Valve control for pressure and volume settings.

 Unique , Ultra Reliable . five point toggle clamping mechanism which is characterized by an almost ideal kinematic velocity feature .

 Mold opening and closing speed are digitally set in 4 stages , each with variable adjustment on pressure , volume and position . 

 Injection Speed profiles digitally set at 5 selectable stages by time or distance . holding pressure by 4 stages and charging by 6 stages . 

Product Details

Injection Unit A B C
Screw Diameter In 1.77 1.97 2.17
mm 45 50 55
Screw L/D ration L/D 22 20 18.5
Shot volume  in3 23.3 28.73 34.77
Cm3 382 471 570
Shot weight (PS) g 347 429 519
oz 12.24 15.13 18.31
Injection Pressure psi 30015 24360 20010
Mpa 207 168 138
Max screw speed rpm 171
Clamping Unit  
Clamping Force KN / T 2100 / 210
U.S.ton 230
Opening stroke In 18.7
mm 475
Tie-bars distance In 20.47 X 20.47
mm 520 X 520
Max.mold height In 21.65
mm 550
Min.mold height In 7.87
mm 200
Ejector Stroke In 5.51
mm 140
Ejector force KN 62
U.S. ton 6.82
Pump power Kw 30
HP 40.2
Heating capacity Kw 11.5
HP 15.41
Oil tank Capacity Litre 310
Machine Dimensions In 214.57 X 59.06 X 90.55
m 5.45 X 1.50 X 2.30
Machine weight Kg 6700
Lbs 14740