Energy saving in heating part: Most of the energy saving in heating is energy saving by electromagnetic heater, and the energy saving rate is about 30%-70% of the old resistor ring.
1. Compared with resistance heating, the electromagnetic heater has an additional layer of insulation, and the heat utilization rate is increased.
2. Compared with resistance heating, the electromagnetic heater directly acts on the material tube to reduce the heat transfer heat loss.
3. Compared to resistance heating, the heating rate of the electromagnetic heater is faster than one quarter, which reduces the heating time.
4. Compared with resistance heating, the heating speed of the electromagnetic heater is fast, the production efficiency is improved, the motor is in a saturated state, which reduces the power loss caused by high power and low demand.
The above four points are the reason why flying electromagnetic heaters can save up to 30%-70% on plastic machinery.
Plastic machinery in the movement, the plastic machinery should be maintained, and this maintenance and maintenance should also be operated according to certain regulations, which is conducive to the operation of mechanical equipment, while maintaining the relevant equipment safety technical performance requirements, can be effective The guarantee of equipment and personnel is the greatest safety.
The equipment is also composed of various components. Before installation, check the individual equipment components, check the main steel structure, bearings, bolts, etc., and at the same time, whether the surface condition of the parts is anti-corrosion, etc., make a record to Prepare for future inspection.
When the equipment is in normal operation, it must be carried out in accordance with the rules and regulations and daily and regular maintenance. The daily maintenance is mainly responsible for cleaning, fastening, lubrication, adjustment and anti-corrosion. This is checked every day, and regular maintenance, The maintenance and repair of mechanical equipment is carried out several times during the specified time, with cleaning, lubrication, adjustment, disassembly and overhaul as the central content.